Well, we all like festive lighting, but this certainly didn’t sound too environmentally based. ….Until he told us the entire lighting cost would only be a fraction of last years’ cost!  HOW?

They switched for the holidays! Today’s LED Holiday lights are reliable, fairly inexpensive and EXTREMELY economical to use. They will pay for themselves in a very short time, and continue to be economical to use for a long, long time, because they last much longer than any of our bulbs. Besides–there are no bulbs to break or go out.

L.E.D. stands for light emitting diodes; they are not bulbs at all, but produce a good white light (the current ones, not the earlier ones).

Although LEDs began being marketed about ten years ago, they were mainly used as novelty accent lighting for commercial buildings. As technology has progressed, LEDs are moving into offices and are just beginning to be seen in our homes. Recessed lighting seems to be the best interior method of handling LEDs at this point….in addition to strings  of light. They are the new lightinhg technology. Isnt it time to switch?

Remember your interior and exterior surroundings need to fit YOU like your favorite shoe fits you, in order to be functional and attractive. Ask yourself…..”Does the Shoe FIT?” If not, contact us; we are the experts in interior spaces and yard space. You’ll be glad you called or wrote us.

Courtesty of OutdoorLighting Perspectives

Hi again!  This blog will continue discussing exterior lighting, focusing on the task lighting of our entries. In review, our yards need three layers of lighting:

1)      Ambient, low level general impression lighting

2)      Task lighting for where we perform tasks

3)      Accent lighting for areas of interest (the brightest area of lighting)

You may have a walk leading up to some steps at your entry. Perhaps a fixture with lights about eye level will be enough for both walkway and steps. The steps will need brighter lighting than the walk so no one trips on them. Therefore, put the light close to the steps, allowing the waning light from the fixture to glow down the walk. If you have a longer walk, you may need a lower, small auxiliary light further down the walk, being careful not to create monotony with too many of the same fixtures.

The steps consist of treads we walk on, and risers (at the back of the tread ) that take the treads to the next level. If we light the steps from below or with lighting that illuminates both tread and riser equally, we have a safety hazard. The user can be easily confused seeing both treads and risers as “one” plane because of the equal lighting on both, instead of 1 horizontal plane (tread) and one vertical plane (riser).But if we light the steps from above, the treads are lit and the risers are in shadow. This is a much safer method of lighting steps.

Now visualize the door. Consider putting a light right above the door or at the side of it. Having one light centered in a porch ceiling will give overall light, but you will be in your own shadow trying to unlock a door. If you have this situation, consider adding task lighting over the door or at it’s side.

Next blog, let’s discuss discuss designing for happiness.

See you then!—Sharon Breay